10-minute data - NO tornado
 2023/ 4/ 5  19:10:
 All averages are for ONLY the last 10-minute record
          (unless otherwise stated)
  Minimum and Maximum heights used for studies of plume are   9.0, 15.0 km
 BM 1. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 2. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 3. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 4. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 5. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
  wind average magnitude 1.5-2.5 km incl.(previous 2 hrs - excluding current hr) =    nan
  winds average magnitude 9-13 km incl.(previous 2 hrs - excluding current hr) =    nan
  Number of edr-s > .001 at 2.0-3.5 km (all beams) in last 3 hrs, excl. current hour =   0
 POWERS Analyses..
 Beam activity (1=active, 0 = not used) 0 0 0 0 0
 Number of heights with missing data for each beam(depends on Tx modes used in the interval)   30   0   0   0   0
  Note that 0.5 km data often saturates and so appears
 like a dud point of zero mean (interpreted as missing data).
  Total number of possible heights in plume-detection height-range =  13 13 13 13 13
  # of points on each beam which exceeded pconlim() (within plume-test region) =   0 13 13 13 13
  % of points on each beam which exceeded pconlim()(within plume-test region) =    0%   0%   0%   0%   0%
 For minstpp=10, ignore the lowest % above
  Mean powers in plume-detection height-range on all beams =    .00 65.56 52.93 60.89 53.73dB
 Total power above pcon in plume-detection height-range summed across all useful beams, and  beams used =    .00 dB  0
  Mean powers above 17 km altitude (should be weaker than plume) =    .00 65.23 52.96 60.99 53.53dB
 # beams with (plume power) > (power above 17 km) =   0
 accumulated sum of (plume pwr) - (pwr > 17 km) =    .00 dB
 Number of hts with powers > pconlim() at hts above 17 km   0   6   6   6   6
 Variation in powers from hacmin+2 to top of column - values > 5 or 6 dB indicate NOT noise   .00   .00   .00   .00   .00
 iaccpt = -1, Too many beams with no data