30-minute data - NO tornado
 2022/ 9/27  18:30:
 All averages are for ONLY the last 30-minute record
          (unless otherwise stated)
  Minimum and Maximum heights used for studies of plume are   9.0, 15.0 km
 BM 1. Plume power limit used was pconlim() =   .691E+07 ( 68.40 dB)
 BM 2. Plume power limit used was pconlim() =   .950E+06 ( 59.78 dB)
 BM 3. Plume power limit used was pconlim() =   .904E+06 ( 59.56 dB)
 BM 4. Plume power limit used was pconlim() =   .734E+06 ( 58.66 dB)
 BM 5. Plume power limit used was pconlim() =   .903E+06 ( 59.56 dB)
  wind average magnitude 1.5-2.5 km incl.(previous 2 hrs - excluding current hr) =    2.7
  winds average magnitude 9-13 km incl.(previous 2 hrs - excluding current hr) =    8.2
  Number of edr-s > .001 at 2.0-3.5 km (all beams) in last 3 hrs, excl. current hour =   1
 POWERS Analyses..
 Beam activity (1=active, 0 = not used) 1 1 1 1 1
 Number of heights with missing data for each beam(depends on Tx modes used in the interval)    0   0   0   0   0
  Note that 0.5 km data often saturates and so appears
 like a dud point of zero mean (interpreted as missing data).
  Total number of possible heights in plume-detection height-range =  13 13 13 13 13
  # of points on each beam which exceeded pconlim() (within plume-test region) =   0  0  0  0  0
  % of points on each beam which exceeded pconlim()(within plume-test region) =    0%   0%   0%   0%   0%
  Mean powers in plume-detection height-range on all beams =  63.19 55.98 53.41 51.37 53.58dB
 Total power above pcon in plume-detection height-range summed across all useful beams, and  beams used = -28.42 dB  5
  Mean powers above 17 km altitude (should be weaker than plume) =  62.69 55.71 53.18 51.28 53.56dB
 # beams with (plume power) > (power above 17 km) =   5
 accumulated sum of (plume pwr) - (pwr > 17 km) =   1.12 dB
 Number of hts with powers > pconlim() at hts above 17 km   0   0   0   0   0
 Variation in powers from hacmin+2 to top of column - values > 5 or 6 dB indicate NOT noise  1.47  1.90  1.59   .94  1.26
 iaccpt = -2, Mean powers in plume-detection-range < pconlim for at least one useable beam