10-minute data - NO tornado
 2021/12/ 7  16: 6:
 All averages are for ONLY the last 10-minute record
          (unless otherwise stated)
  Minimum and Maximum heights used for studies of plume are  10.0, 15.0 km
 BM 1. Plume power limit used was pconlim() =   .674E+15 (148.29 dB)
 BM 2. Plume power limit used was pconlim() =   .443E+14 (136.46 dB)
 BM 3. Plume power limit used was pconlim() =   .666E+14 (138.23 dB)
 BM 4. Plume power limit used was pconlim() =   .823E+14 (139.15 dB)
 BM 5. Plume power limit used was pconlim() =   .901E+14 (139.55 dB)
  wind average magnitude 1.5-2.5 km incl.(previous 2 hrs - excluding current hr) =    nan
  winds average magnitude 9-13 km incl.(previous 2 hrs - excluding current hr) =    nan
  Number of edr-s > .001 at 2.0-3.5 km (all beams) in last 3 hrs, excl. current hour =   0
 POWERS Analyses..
 Beam activity (1=active, 0 = not used) 1 1 1 1 1
 Number of heights with missing data for each beam(depends on Tx modes used in the interval)    9  24  24   5   9
  Note that 0.5 km data often saturates and so appears
 like a dud point of zero mean (interpreted as missing data).
  Total number of possible heights in plume-detection height-range =  11 11 11 11 11
  # of points on each beam which exceeded pconlim() (within plume-test region) =   0  0  0  0  0
  % of points on each beam which exceeded pconlim()(within plume-test region) =    0%   0%   0%   0%   0%
 For minstpp=10, ignore the lowest % above
  Mean powers in plume-detection height-range on all beams = 142.34 18.52  9.67136.06138.53dB
 Total power above pcon in plume-detection height-range summed across all useful beams, and  beams used = ****** dB  5
  Mean powers above 17 km altitude (should be weaker than plume) = 133.65 10.71  1.88127.98130.67dB
 # beams with (plume power) > (power above 17 km) =   5
 accumulated sum of (plume pwr) - (pwr > 17 km) =  40.23 dB
 Number of hts with powers > pconlim() at hts above 17 km   0   0   0   0   0
 Variation in powers from hacmin+2 to top of column - values > 5 or 6 dB indicate NOT noise  1.21  -inf  -inf   .93  1.02
 iaccpt = -2, Mean powers in plume-detection-range < pconlim for at least one useable beam