10-minute data - NO tornado
 2024/ 4/13   7:55:
 All averages are for ONLY the last 10-minute record
          (unless otherwise stated)
  Minimum and Maximum heights used for studies of plume are   9.0, 15.0 km
 BM 1. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 2. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 3. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 4. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
 BM 5. Plume power limit used was pconlim() =   .631E+01 (  8.00 dB)
  wind average magnitude 1.5-2.5 km incl.(previous 2 hrs - excluding current hr) =    nan
  winds average magnitude 9-13 km incl.(previous 2 hrs - excluding current hr) =    nan
  Number of edr-s > .001 at 2.0-3.5 km (all beams) in last 3 hrs, excl. current hour =   0
 POWERS Analyses..
 Beam activity (1=active, 0 = not used) 0 0 0 0 0
 Number of heights with missing data for each beam(depends on Tx modes used in the interval)   30  30  30  30  30
  Note that 0.5 km data often saturates and so appears
 like a dud point of zero mean (interpreted as missing data).
  Total number of possible heights in plume-detection height-range =  13 13 13 13 13
  # of points on each beam which exceeded pconlim() (within plume-test region) =   0  0  0  0  0
  % of points on each beam which exceeded pconlim()(within plume-test region) =    0%   0%   0%   0%   0%
 For minstpp=10, ignore the lowest % above
  Mean powers in plume-detection height-range on all beams =    .00   .00   .00   .00   .00dB
 Total power above pcon in plume-detection height-range summed across all useful beams, and  beams used =    .00 dB  0
  Mean powers above 17 km altitude (should be weaker than plume) =    .00   .00   .00   .00   .00dB
 # beams with (plume power) > (power above 17 km) =   0
 accumulated sum of (plume pwr) - (pwr > 17 km) =    .00 dB
 Number of hts with powers > pconlim() at hts above 17 km   0   0   0   0   0
 Variation in powers from hacmin+2 to top of column - values > 5 or 6 dB indicate NOT noise   .00   .00   .00   .00   .00
 iaccpt = -1, Too many beams with no data